-->
Our Process Gallery Why Choose Us

●

Now Booking Michigan Fence Builds & Gate Installations • Free On-Site Estimates

Metro Detroit & Ann Arbor

CUSTOM GATES

|

Built Not to Sag

Custom Driveway Gate Installation in Metro Detroit

Arched wood entry gates, ornamental aluminum driveway gates and double drive gates hung on posts built to carry them. A gate is the hardest-working part of a fence, so we size the posts, footings and hardware before we talk about style.

Wood & Aluminum Gates

Steel-Stiffened Gate Posts

Openings to 16 Feet

Opener-Ready Framing

DIRECT DISPATCH PHONE

Get Your Free Estimate

Quick response guaranteed within 24 hours

Online Booking Open

🔒 Your contact info is strictly confidential. We never sell your data or spam you.

WHY GATES FAIL

A Good Gate Is Mostly the Post Behind It

Almost every dragging, sagging or unlatching gate we repair comes down to one of these four problems. Our builds are designed around all of them.

Undersized Hinge Posts

A 4x4 cannot carry a wide wood gate for long. We use larger posts, steel inserts or steel posts on the hinge side so the leverage does not bend the post.

Steel-stiffened hinge posts

Shallow Footings

Gate posts carry twisting load all year. Ours go 42 inches deep in concrete, below the frost line, so winter heave cannot lift one side.

42″ frost-line footings

Unbraced Frames

Wood gates need a diagonal brace running from the bottom hinge corner up to the latch side, plus an adjustable anti-sag kit on wide gates.

Braced the right direction

Light Hardware

Heavy strap or adjustable hinges, lockable latches and drop rods with ground sleeves keep double gates aligned and closed in wind.

Hardware sized to the gate

GATE SYSTEMS

Choose Your Gate

Three specialties cover most custom gate work. Open any one for sizes, materials and what drives the price.

Statement Entry

Arched Wood Entry Gates

Cedar, Built on Site

Arched or eyebrow-top cedar gates for side yards, garden entries and courtyards, on braced frames with heavy black hardware.

Widths:

3ft to 5ft walk

Tops:

Arched, eyebrow, flat

Wood:

Western Red Cedar

Best For:

Side yards, gardens

Matched to your fence boards

Rust-Free

Ornamental Aluminum Driveway Gates

Single & Double Swing

Powder-coated aluminum drive gates in flat, arched or estate styles. Light enough to swing easily, rigid enough for wide openings, ready for an opener.

Openings:

10ft to 16ft

Styles:

Flat, arched, estate

Colors:

Black, bronze

Best For:

Driveways, estates

Never needs repainting

The Foundation

Heavy-Duty Structural Gate Posts

Steel, Steel-Core & Oversized Wood

Replacement or upgraded gate posts for new and existing fences. The fix for gates that sag, drag or no longer latch because the post moved.

Options:

Steel, steel-core, 6x6

Depth:

42″+ in concrete

Footing:

Oversized, bell-shaped

Best For:

Wide or heavy gates

Stops sag at the source

SWING VS. SLIDE

Which Driveway Gate Works on Your Lot?

Most residential driveways get a double swing gate: two leaves that meet in the middle, held shut by a center drop rod. Swing gates need clear, fairly level ground in their arc, and in Michigan that arc also has to clear packed snow, so we set the bottom clearance and swing direction with winter in mind. On sloped driveways, a gate can be hung to swing out toward the street side or built with a raked bottom.

Where a driveway climbs or there is no room for a swing arc, a slide gate rolls sideways along the fence line instead. Cantilever designs with no ground track, like our commercial slide gates, are the most reliable in snow. Planning to automate? Framing and post sizing for an opener should be decided before the gate is built; see automatic gates for what that involves.

DRIVEWAY GATE TYPES

Double Swing

Cantilever Slide

Space Needed

Beyond the opening

Swing arc

Run along fence

Sloped Drive

Grade at the gate

Limited

Handles well

Snow

Michigan winters

Clear the arc

No ground track

Automation

Adding an opener

Arm or ram

Rack and pinion

Relative Cost

Same opening

Lower

Higher

HOW A GATE PROJECT RUNS

Designed, Set and Hung in Three Steps

New gates can be added to an existing fence or built with a new one. Either way, posts come first.

01

Step 1

Measure & Design

We measure the opening, check grade across the swing, discuss vehicles and equipment that need to pass, and quote the gate, posts and hardware together.

Opening and grade measured

Swing direction chosen

Posts sized to gate weight

PAPERWORK MANAGED

02

Step 2

Permit & Miss Dig

Gates on a new fence ride on the fence permit, and we file it with the plot plan. Miss Dig is called before gate post holes are dug.

Permit filed with fence

HOA packet if required

Utilities marked first

03

Step 3

Set, Hang & Adjust

Posts are set in concrete and cured before the gate carries load. Gates are hung, leveled, braced and adjusted, and we test latches and drop rods with you.

Posts cured before hanging

Drop rod sleeves set

Latches tested together

Gate Already Sagging or Dragging?

We repair and reset existing gates too. See gate realignment and hinge repair.

GATE HARDWARE & OPTIONS

Hardware That Makes a Gate Work Every Day

Small parts decide whether a gate is a pleasure or a chore.

Adjustable Hinges

Hinges with adjustment let us fine-tune the gate after the wood settles, instead of re-hanging it.

Drop Rods & Sleeves

A rod into a sleeve set in concrete holds a double gate's inactive leaf straight in wind.

Locking Latches

Gravity, magnetic and keyed latches, mounted so they can be padlocked or operated from both sides.

Anti-Sag Kits

A steel cable and turnbuckle across a wood gate lets you pull it back square if it ever drops.

Gate Stops & Holdbacks

Stops keep gates from over-swinging; holdbacks keep a drive gate open while you back out a trailer.

Opener-Ready Framing

Reinforced frames and posts built to accept an automatic operator now or later.

FREQUENTLY ASKED QUESTIONS

Gate Installation Questions

Size, cost, sag and automation.

How much does a driveway gate cost?

A manual double drive gate in wood or aluminum, with properly sized posts, commonly lands in the low-to-mid thousands installed, depending on width, style and material. Automation adds an operator, power and safety devices. We give a written price after measuring.

Why do wood gates sag?

Usually the hinge post leans or the frame racks because the brace runs the wrong way or there is none. We fix both with stiffer posts, a correctly oriented diagonal brace and adjustable hinges.

How wide should a driveway gate be?

Wide enough for the largest thing you will drive through plus room for mirrors, usually 12 feet for cars and 14 to 16 feet for trucks, trailers or RVs.

Can you add a gate to my existing fence?

Yes. We cut in the opening, replace the posts on each side with gate-rated posts and build or install a gate that matches the fence.

Do I need a permit for a new gate?

A gate installed with a new fence is covered by the fence permit, which we file. Replacing a gate in an existing fence usually does not need one, but front-yard gates still have to respect your city's height and setback limits.

Can my gate be automated later?

Yes, if it is built for it. We size posts and reinforce the frame up front so an opener can be added without rebuilding the gate.

FREE GATE QUOTE

Request Your Free Gate Estimate

Tell us about the opening and how you use it. We will measure and quote the gate, posts and hardware together.

PREFER TO CALL DIRECTLY?

Speak directly with our estimating desk for quick questions or emergency repairs.

Posts sized to the gate before building

Wood and aluminum styles to match your fence

Workmanship warranty on every gate

Get Your Free Estimate

Quick response guaranteed within 24 hours

Online Booking Open

🔒 Your contact info is strictly confidential. We never sell your data or spam you.