Metro Detroit's Vinyl Gate Installation Experts
Matching Vinyl Walk & Drive Gates in Metro Detroit, MI
Manufacturer-Matched Gates — Heavy-Duty Hardware — HOA-Friendly Styles
At All Fenced Up, we custom-build vinyl walk and drive gates to match your panel system exactly — stainless hardware, anti-sag frames, and posts set in concrete below the frost line. Free on-site estimates across Metro Detroit.
Licensed & Insured
5-Star Rated
500+ Happy Homeowners
Request Your Quote
Vinyl Gate Styles & Hardware Options
A vinyl fence gate is only as good as its hardware and post installation. We use manufacturer-matched gate frames with heavy-duty aluminum hardware — hinges, latches, and drop rods rated for Michigan winters. Here's what to know about vinyl gate options and why proper installation matters.
Double Drive Gates — Up to 16-ft Wide
Double drive gates for driveways up to 16-ft wide, matched to your privacy or decorative fence style. Posts are set in oversized concrete footings to handle the gate weight without sagging. Drop rods and cane bolt hardware included. Installed price (gate pair only): $650–$1,200.
Cantilever & Sliding Gate Options
For properties where swing gates won’t work — tight spaces, sloped driveways, or wide openings — we offer cantilever and sliding gate configurations. Custom sizing available. Call for a quote on your specific property layout.
Why Metro Detroit Homeowners Trust All Fenced Up for Vinyl Gates
Gates are the hardest-working part of any fence. When you hire All Fenced Up, you work directly with Javier and our experienced crew. We've installed hundreds of vinyl gates across Metro Detroit and know what fails — undersized posts, poor hardware, inadequate footings. We get it right the first time.
Oversized Posts and Footings for Gate Stability
Gate posts take far more stress than fence posts — they hold the full weight of the gate through every open-close cycle and Michigan winter. We use oversized 5x5 or 6x6 vinyl posts set in deep, wide concrete footings to prevent heave and sagging. Our gate installations stay plumb and swing true for years.
Permits, HOA Approvals, MISS DIG — All Handled
We handle all permits, MISS DIG 811 utility locates, and HOA approvals. HOAs in Metro Detroit often require specific gate styles and hardware — we know the local requirements and ensure your installation passes inspection the first time.
Manufacturer-Matched Gate Frames and Hardware
We use only manufacturer-matched vinyl gate frames — built to the same specification as your fence panels so they look seamless. All hardware is heavy-duty aluminum or stainless steel rated for Michigan winters. No cheap galvanized hardware that rusts and corrodes.
Our Vinyl Gate Styles
We install vinyl gates matched to every fence style we offer across Metro Detroit. Every gate is installed with oversized posts, manufacturer-specified hardware, and the precision needed for a gate that swings true and stays level through Michigan's toughest seasons.
Single walk gate in solid tongue-and-groove vinyl, matched to your privacy fence. 3- to 4-ft wide. Available in white, tan, clay, and woodgrain. Heavy-duty hinges and latch hardware included.
Walk gate with solid privacy panel and decorative lattice top, matched to your lattice-top privacy fence. HOA-approved in most Metro Detroit communities.
Single picket walk gate in your choice of style — spaced, scallop, dog-ear, or spade-top. 3- to 4-ft wide. Matched to your picket fence style and color.
Pair of vinyl privacy panels on aluminum frames, sized to your driveway width. Includes heavy-duty hinges, cane bolt hardware, and drop rod closure. Available up to 16-ft total opening.
Side yard access gate in semi-privacy or spaced panel style. Matched to your semi-privacy fence. 3- to 4-ft wide. Great for pool areas and side yard access.
Wider single passage gates for equipment access, trailers, or large openings. 4- to 6-ft wide in privacy or semi-privacy styles. Oversized post footings required for wider openings.
How Our Vinyl Gate Installation Works
Vinyl gate installation requires more precision than standard fence panel installation — gate posts need deeper footings, and hardware must be perfectly calibrated. Here's exactly what to expect when we install your vinyl gate.
We visit your property, measure the gate opening, assess the terrain and grade, review style and hardware options, and provide a detailed written quote within 24 hours — no pressure.
We submit MISS DIG 811 requests and pull all municipal permits. Typically 3–5 business days to clear before we can start digging.
Posts are set a minimum of 48 inches deep using a hydraulic auger and concrete mix. We allow 24–48 hours of cure time before attaching any rails or boards.
Gate frame and panels installed, hardware mounted and calibrated for smooth swing and positive latching. Drop rods and cane bolts tested. Final inspection, job site cleaned, and a complete walkthrough and demonstration before we leave.
Frequently Asked Questions About Vinyl Gate Installation
Have questions about vinyl gate installation? We've compiled the most common questions from Metro Detroit homeowners below. Call (734) 977-0554 anytime for personalized guidance.
Do I need a permit to install a vinyl gate?
Most municipalities require permits for fences over 4 ft tall or any front-yard fence. We pull all required permits as part of our service - permit fees typically run $50–$150.
Why do gate posts need to be set differently than fence posts?
Michigan's frost depth is 42". We set all posts a minimum of 48" deep in concrete to prevent frost heave. For taller fences, we go deeper.
How long does vinyl gate installation take?
Most residential projects complete in 1–2 days. A 150-ft privacy fence with one walk gate typically takes our crew about 1.5 days from post setting through final board installation.
Can you add a gate to my existing vinyl fence?
Yes — we can cut an opening in an existing vinyl fence and install a matching gate, provided the existing posts are in good condition. If the adjacent posts need to be replaced with oversized gate posts, that's typically part of the work. Call us for an assessment of your specific situation.
Why is my vinyl gate sagging?
Most vinyl gate sag is caused by either undersized gate posts, inadequate concrete footings, or cheap hardware that wears out. If your gate is sagging, call us — we can assess whether the issue is the post, the hardware, or the gate frame itself and recommend the right repair. Properly installed vinyl gates with oversized posts and quality hardware don't sag.
What hardware comes with vinyl gate installation?
We warranty all workmanship for 1 year. Our materials are expected to perform 15–30 years with proper maintenance - and we're always available if you have questions.
We Serve All of Metro Detroit
All Fenced Up installs vinyl gates across the entire Metro Detroit region. From the Downriver communities to the northern Oakland County suburbs, our crews handle any property size or gate configuration. We work in 70+ cities across Wayne, Oakland, and Macomb counties.
Wyandotte•Woodhaven•Wixom•Westland•Wayne•Warren•Walled Lake•Utica•Troy•Trenton•Taylor•Sylvan Lake•Sterling Heights•St. Clair Shores•Southgate•Southfield•South Lyon•Royal Oak•Roseville•Romulus•Rockwood•Rochester Hills•Rochester•Riverview•River Rouge•Richmond•Pontiac•Plymouth•Pleasant Ridge•Orchard Lake Village•Oak Park•Novi•Northville•New Baltimore•Mount Clemens•Memphis•Melvindale•Madison Heights•Livonia•Lincoln Park•Lathrup Village•Lake Angelus•Keego Harbor•Inkster•Huntington Woods•Highland Park•Hazel Park•Harper Woods•Hamtramck•Grosse Pointe Woods•Grosse Pointe Shores•Grosse Pointe Park•Grosse Pointe Farms•Grosse Pointe•Gibraltar•Garden City•Fraser•Flat Rock•Ferndale•Fenton•Farmington Hills•Farmington•Ecorse•Eastpointe•Detroit•Dearborn Heights•Dearborn•Clawson•Clarkston•Center Line•Bloomfield Hills•Birmingham•Berkley•Belleville•Auburn Hills•Allen Park
Get Your Free Vinyl Gate Estimate Today
We'll come to your property, measure the gate opening, assess the terrain, walk you through gate style and hardware options, and give you a detailed written quote with no surprises. Most estimates completed within 24 hours.