RIVERVIEW, WAYNE COUNTY
|
Downriver Crew
Fence Installation in Riverview, MI
Riverview sits on the Detroit River between Wyandotte and Trenton, with ranch and split-level neighborhoods climbing west from Jefferson Avenue toward Fort Street. We build wood, vinyl, aluminum and chain link fences here on 42-inch concrete footings, with the city permit and Miss Dig ticket handled for you.
Riverview Permits Filed
Old Fence Hauled Away
42″ Frost-Line Posts
Free Written Quotes
DIRECT DISPATCH PHONE
Get Your Free Estimate
Quick response guaranteed within 24 hours
Online Booking Open
🔒 Your contact info is strictly confidential. We never sell your data or spam you.
MATERIALS FOR RIVERVIEW YARDS
Which Fence Fits a Riverview Ranch or River Lot
Most Riverview homes date from the 1950s through the 1970s, on lots wide enough for a full backyard run and a drive gate. These four systems cover nearly every request we get here.
Backyard Privacy
Wood Privacy Fencing
Cedar & Pressure-Treated Pine
The usual replacement for the original fences on Riverview's postwar streets. Cedar board-on-board looks finished from both sides, which keeps the neighbor behind you happy.
Heights:
4ft to 6ft
Wood:
Cedar or treated pine
Styles:
Dog-ear, Shadowbox
Best For:
Rear-yard privacy
Stain-ready Western Red Cedar
Low Upkeep
Vinyl Fencing
Virgin PVC Privacy & Picket
A good fit for homeowners who are done restaining. White or tan vinyl pairs well with the brick and aluminum-sided ranches common between Fort Street and Jefferson.
Heights:
4ft to 6ft
Colors:
White, Tan, Woodgrain
Rails:
Aluminum reinforced
Best For:
Set-and-forget privacy
Rinse twice a year, done
River Views
Ornamental Aluminum
Powder-Coated Black or Bronze
On the east side near the river, an open picket fence keeps kids and dogs in without blocking the view. It shrugs off damp river air and meets pool barrier rules with the right gate hardware.
Heights:
3ft to 5ft
Finish:
Black or bronze
Gates:
Self-closing available
Best For:
Views, pools, fronts
Will not rust or rot
Dogs & Budget
Chain Link Fencing
Galvanized & Vinyl-Coated
The lowest cost per foot for a big Riverview backyard or a dog run. Black vinyl-coated mesh disappears against grass and shrubs far better than bare galvanized.
Heights:
4ft to 6ft
Finish:
Galvanized or black
Gates:
Walk and drive
Best For:
Pets, large yards
Swap-out of old chain link
NEARBY DOWNRIVER CITIES
We Also Build Fences Around Riverview
Our crews work up and down the river every week. If you live next door to Riverview, these pages cover your city.
Wyandotte
Older homes on compact lots just north along the river, from front picket to rear cedar.
Trenton
Riverfront and canal-side properties south of Riverview where aluminum and vinyl lead.
Southgate
Brick ranch streets to the west with steady demand for privacy replacements.
Taylor
Big Downriver suburb where vinyl privacy and black chain link are the top builds.
Lincoln Park
Tight bungalow lots and detached garages where every foot of fence line counts.
BUILDING IN RIVERVIEW
What a Riverview Fence Job Really Involves
Riverview is mostly established single-family neighborhoods, so the typical job is a replacement: an aging cedar or galvanized chain link fence comes out, the old concrete footings get dug or cut down, and a new line goes in on the same property line. We measure from your survey or the property pins, not the old fence, because original fences here were often set a few inches off.
Soil near the river is heavy, wet clay that holds water and heaves hard in January. That is why we set every post 42 inches deep in concrete, below the Michigan frost line. Most Metro Detroit cities limit front-yard fences to about 3-4 feet and allow taller privacy fences behind the house; we confirm your lot's rules with the city building department before quoting, and file the permit ourselves.
RIVERVIEW PLANNING FACTORS
Typical
Watch For
Typical Lot
Size and layout
Mid-size suburban
Corner-lot sightlines
Housing Era
Most common
1950s–1970s ranch
Newer condos
Common Styles
What we build most
Cedar, white vinyl
Aluminum by river
Permit
City building dept.
Filed by us
Front height limits
Frost Depth
Post setting
42″ in concrete
Wet clay heave
RIVERVIEW PROJECT FLOW
Permit, Utility Marks and Build in Riverview
A typical Riverview backyard goes from first call to finished fence in two to four weeks, most of it waiting on the permit.
01
Step 1
Free Measure & Quote
We walk the line, note the old fence, garage corners and gate spots, and leave an itemized written price.
Property pins located
Tear-out priced in
Gate widths agreed
PAPERWORK MANAGED
02
Step 2
Permit & Miss Dig
We draw the plot plan, file with the Riverview building department and call in the Miss Dig 811 ticket before any digging.
Plot plan drawn
City permit filed
Gas and electric marked
03
Step 3
Tear-Out, Build & Cleanup
The old fence and footings come out, new posts go 42 inches deep, and we walk the finished line with you.
Old material hauled
Gates hung and latched
Yard raked clean
Old Fence Leaning After a Storm?
Call (734) 977-0554. We can usually measure a Riverview property within the week.
FREQUENTLY ASKED QUESTIONS
Riverview Fence Questions
What Riverview homeowners ask us before they book.
Do I need a permit for a fence in Riverview?
Yes, plan on one. Riverview, like most Downriver cities, issues fence permits through its building department. We confirm the requirement for your address, draw the plot plan and file it for you.
How tall can my backyard fence be in Riverview?
Six feet is the common rear-yard privacy height across Metro Detroit, with front yards usually limited to about 3-4 feet. We check Riverview's current rules for your specific lot, including corner lots, before quoting.
Will you remove my old fence?
Yes. Tear-out, footing removal and haul-away are listed as their own line on your quote, so you can see exactly what it costs.
What fence holds up best near the Detroit River?
Powder-coated aluminum and virgin PVC vinyl handle the damp air without rust or rot. Whatever the material, the posts go 42 inches deep so the wet clay cannot push them out of line.
How much does a fence cost in Riverview?
Most backyard privacy projects land between about $30 and $55 per linear foot installed, depending on material, height, gates and tear-out. Chain link runs lower. You get an exact number after the free measure.
FREE RIVERVIEW QUOTE
Get a Written Fence Price for Your Riverview Home
Send your address and what the fence needs to do. We measure, check Riverview's rules and give you a line-item price.
PREFER TO CALL DIRECTLY?
Speak directly with our estimating desk for quick questions or emergency repairs.
Itemized pricing, tear-out included
Riverview permit and Miss Dig handled
Workmanship warranty on every install
Get Your Free Estimate
Quick response guaranteed within 24 hours
Online Booking Open
🔒 Your contact info is strictly confidential. We never sell your data or spam you.