-->
Our Process Gallery Why Choose Us

●

Now Booking Michigan Fence Builds & Gate Installations • Free On-Site Estimates

Metro Detroit & Ann Arbor

ALUMINUM FENCE GUIDE

|

Posts & Sizing

Black Aluminum Fence Posts: Sizes and Types

Black aluminum posts come in a few standard sizes and wall thicknesses, and choosing the wrong one is the usual reason ornamental fences lean or gates sag. Here is what each size is for, how long the post must be for Michigan frost, and what they cost.

2″, 2.5″ & 4″ Sizes

Line, End, Corner, Gate

Lengths for 42″ Depth

Powder Coat Explained

Get Your Free Estimate

Quick response guaranteed within 24 hours

Online Booking Open

🔒 Your contact info is strictly confidential. We never sell your data or spam you.

KEY TAKEAWAYS

Choosing a Black Aluminum Post

Four things decide whether a post is right for the job.

Size by Load

2-inch square posts carry residential panels. 2.5-inch posts carry commercial panels and walk gates. Drive gates need 4 inches or more.

2″ / 2.5″ / 4″+

Wall Thickness Matters

A 2-inch post with a .060-inch wall bends far sooner than one with a .125-inch wall. Gate posts should always be the heavy wall.

.125″ wall for gates

Punched for Its Position

Line posts are punched on two sides, corners on adjacent sides, ends on one side, and gate posts are often blank.

Order by position

Powder Coat, Not Paint

Quality posts carry a baked polyester powder coat that resists chalking and chipping. Cut ends need touch-up paint.

Touch up every cut

SIZES & PRICES

Black Aluminum Post Sizes, Uses and Cost

Residential ornamental aluminum, like the 4- and 5-foot fences on our decorative aluminum picket page, uses 2-inch square posts on 6-foot centers. Commercial-grade panels, pool fences in high-traffic settings and walk gates step up to 2.5-inch posts. Drive gates go on 4-inch or larger posts with .125-inch walls, or on steel; our structural gate post and 12-foot aluminum gate pages cover why.

Length is the panel height plus 1 to 2 inches of ground clearance, plus burial depth. We set aluminum posts 42 inches deep in concrete, so a 4-foot fence takes a post about 7.5 to 8 feet long. Big-box posts are often sized for 24-inch burial, which is shallow for Michigan frost. Posts on a patio or pool deck can be surface-mounted on a base plate or core-drilled into the slab.

POST SIZE GUIDE

Typical Use

Price Each

2″ x 2″, .060–.075″

Line, end, corner

Residential 4–5 ft

$30–$70

2.5″ x 2.5″

Heavier panels

Commercial, walk gates

$60–$120

2.5″–3″, .125″

Gate posts

Gates to 6 ft wide

$80–$150

4″ x 4″, .125″

Drive gate posts

Gates to 12–16 ft

$120–$250

6″ x 6″

Heavy duty

Large or tall gates

$250–$400

INSTALLATION

Setting Black Aluminum Posts So They Stay Plumb

Aluminum panels are light, so the post footing does almost all the work against frost and leaning.

01

Step 1

Layout and Spacing

Run a string line, call Miss Dig 811, and space posts to the actual panel width plus bracket allowance, usually about 6 feet on center. Measure, do not assume.

String line on the fence path

Panel width measured on site

Gate openings sized to hardware

42 INCH DEPTH

02

Step 2

Dig and Set Below Frost

Holes go 42 inches deep and about 10 inches wide. Posts are set in concrete, plumbed on two sides, and held at the right height while panels are fitted.

42″ deep, 10″ wide

Plumbed on two faces

Set with panels to keep spacing

03

Step 3

Panels, Caps and Touch-Up

Panels are fastened with stainless screws, racked to follow grade where needed, caps installed, and every cut end painted to seal the aluminum.

Stainless fasteners

Panels racked on slopes

Cut ends touched up

Replacing One Damaged Post?

Most aluminum fence lines use standard post sizes and punch spacing. Bring us a photo and measurements and we can usually match it.

POST TYPES & OPTIONS

Aluminum Post Types and Accessories

What to ask for when you order or replace posts.

Line Post

Punched on opposite sides to take panels in a straight run. The most common post in any fence.

End Post

Punched on one side only, for where a run stops at a house, gate or property corner.

Corner Post

Punched on two adjacent sides for a 90-degree turn. Odd angles use a line or blank post with swivel brackets.

Gate or Blank Post

No punches, heavy wall, with gate hinges and latches bolted on. Never hang a gate on a standard line post.

Post Caps

Flat, pyramid, ball, New England and solar light caps. Caps keep water out and finish the look.

Surface Mount Plates

A welded base plate lets posts bolt down on a deck or concrete patio where digging is not possible.

Black Is the Standard

Black is the most stocked color and suits most homes. Bronze and white are available; see 4-foot black aluminum fence.

Whole-Fence Options

Styles, heights and pool options are on our aluminum fencing hub and aluminum driveway gates.

ALUMINUM FENCE SYSTEMS

Where These Posts Go

Post size follows the system. Open any of these for styles, heights and pricing.

Residential

Decorative Aluminum Picket

4 ft to 6 ft

Flat-top and spear-top panels on 2-inch posts for backyards, front yards and dog runs.

Posts:

2″ square

Heights:

4, 5, 6 ft

Spacing:

6 ft on center

Best For:

Homes, front yards

Posts 42″ in concrete

Pool

Pool Safety Fencing

Code Spacing

Pool-code picket spacing with heavier gate posts for self-closing gates that must latch every time.

Posts:

2″ line, 2.5″ gate

Height:

48″–60″

Mount:

Soil or core-drilled

Best For:

Pool enclosures

Built to pass inspection

Gates

Arched Aluminum Driveway Gates

Single and Double Swing

Driveway gates hung on 4-inch heavy-wall or steel posts so they do not sag or drag.

Posts:

4″+ heavy wall

Widths:

To 16 ft double

Tops:

Arched or flat

Best For:

Driveways

No sagging gates

FREQUENTLY ASKED QUESTIONS

Black Aluminum Fence Post Questions

Sizes, depth and repair.

What size aluminum post do I need for a 4-foot fence?

A 2-inch square post is standard for residential 4- and 5-foot aluminum fences. Use 2.5-inch or heavier posts with a .125-inch wall for gates.

How deep should aluminum fence posts be set?

In Metro Detroit we set them 42 inches deep in concrete, below the frost line. Many kits assume 24 inches, which lets frost lift posts and throw panels out of line.

How long should an aluminum fence post be?

Panel height plus about 2 inches of clearance, plus burial depth. At 42 inches deep, a 4-foot fence needs a post about 7.5 to 8 feet long, and a 5-foot fence about 9 feet.

Do black aluminum fence posts rust?

No. Aluminum does not rust. A good powder coat keeps it black for decades; scratches and cut ends should be touched up so the coating does not lift.

Can I put aluminum posts in concrete?

Yes, that is standard. Crown the top of the concrete so water runs away from the post, and do not let the post sit in a pocket that holds water.

How much does it cost to replace an aluminum fence post?

Most single post replacements run $200 to $450 installed, including the post, concrete and refitting the panels. Gate posts cost more because of the heavier post and rehanging the gate.

ALUMINUM FENCE QUOTE

Get Your Aluminum Fence or Post Repair Priced

New fence or a damaged post, we measure, match the post size and style, and leave a written quote.

PREFER TO CALL DIRECTLY?

Speak directly with our estimating desk for quick questions or emergency repairs.

Posts sized for panel and gate loads

Set 42 inches deep in concrete

Cut ends and scratches touched up

Get Your Free Estimate

Quick response guaranteed within 24 hours

Online Booking Open

🔒 Your contact info is strictly confidential. We never sell your data or spam you.