-->
Our Process Gallery Why Choose Us

●

Now Booking Michigan Fence Builds & Gate Installations • Free On-Site Estimates

Metro Detroit & Ann Arbor

FENCE GUIDE

|

Privacy Upgrades

How to Add Privacy to Chain Link Fence Panels

You do not have to tear out chain link to get privacy. Slats, fabric screen, wood overlays and hedges all work, from about $4 to $30 per foot. The catch is wind: a screened fence catches it, so the posts have to be up to the job.

Slats vs. Screen vs. Wood

Privacy % and Cost Compared

Wind Load Explained

When to Replace Instead

DIRECT DISPATCH PHONE

Get Your Free Estimate

Quick response guaranteed within 24 hours

Online Booking Open

🔒 Your contact info is strictly confidential. We never sell your data or spam you.

KEY TAKEAWAYS

Chain Link Privacy in Four Points

What to know before you buy slats or a roll of screen.

Fabric Screen Is Fastest

Knitted HDPE screen zip-ties on in an afternoon and blocks 85 to 95% of the view. Expect 5 to 10 years before it fades.

$2–$6/ft material

Slats Look Built-In

Vinyl slats woven into the mesh give a cleaner, more permanent look. Winged or hedge slats reach 90% or more.

$6–$15/ft material

Wind Load Is Real

Bare chain link lets wind through. Screened, a 6-foot run acts like a solid fence on posts that were not sized for it.

Check posts first

Sometimes Replace

If the fence is rusted, leaning or only 4 feet tall, privacy add-ons cost a lot for a little. A new privacy fence may be the better buy.

Compare both prices

OPTIONS COMPARED

Slats, Screens and Overlays: Privacy, Cost and Lifespan

Fabric screen is the budget and speed choice; our privacy fabric and fence fabric screen pages go deeper on grades and fastening. Vinyl slats cost more and take longer to install, but they look like part of the fence and last 10 to 15 years. Hedge slats with fake foliage are the most opaque. Wood overlays, cedar boards hung on a frame bolted to the posts, give 100% privacy and a wood look, but add the most weight and wind load.

All of these turn a see-through fence into a sail. A typical residential chain link fence uses 1-5/8-inch line posts set shallow, which was fine for bare mesh. Once screened, wind can bend line posts or lift footings. Options are a wind-slit screen, adding line posts, or resetting posts deeper. If you are starting fresh, black vinyl-coated chain link with slats built in is the cleanest result.

PRIVACY ADD-ONS, 6 FT

Installed /ft

Privacy

Knit Fabric Screen

5–10 year life

$4–$10

85–95%

Standard Vinyl Slats

10–15 year life

$10–$22

75–85%

Winged or Hedge Slats

Fake foliage or fins

$15–$30

90–98%

Cedar Board Overlay

Framed on posts

$25–$45

100%

New Vinyl Privacy

Replace the fence

$35–$55

100%

HOW TO DO IT

Adding Privacy Slats or Screen to Chain Link

Either job is a reasonable DIY for a sound fence. Check the fence before you buy material.

01

Step 1

Inspect the Fence

Walk the line. Terminal posts should be plumb, fabric tight, and line posts no more than 10 feet apart. Fix leaning posts first or the added weight will make them worse.

Posts plumb and solid

Fabric tight, no sag

Measure height and total length

TOP TO BOTTOM

02

Step 2

Install Slats or Screen

Slats feed down through the diamonds and lock with a top or bottom rail. Screen goes up with zip ties or hog rings through grommets every 12 to 24 inches, pulled snug.

Slats cut to fence height

Ties at every grommet

Start at a terminal post

03

Step 3

Plan for Wind

On exposed lots or 6-foot runs, use screen with wind slits, add a line post at mid-span, or brace the terminals. Check ties after the first big storm.

Wind-slit screen on open lots

Extra line posts if needed

Re-tighten after storms

HOA or City Rules

Some HOAs and cities limit slats, colors or screen on fences facing the street. Check before you buy, especially for front yards and corner lots.

MORE IDEAS

Other Ways to Make Chain Link Private

Beyond slats and screen, these are the options homeowners ask us about.

Prebuilt Privacy Panels

Temporary chain link panels on stands come with screen for job sites and events. See 6 ft chain link panels and temporary privacy fences.

Living Screen

Arborvitae, clumping bamboo or a vine like clematis on the mesh. Slow to fill in and needs water, but it is the softest look.

Reed or Bamboo Rolls

Natural rolls wired to the mesh. Cheap and warm-looking, but they break down in 2 to 4 Michigan winters.

Partial Screening

Screen only the stretch that faces the neighbor's deck or the street. It costs less and keeps wind load down on the rest.

Cedar Overlay Frame

Boards hung on a frame bolted to the posts. Full privacy and a wood look; posts must be strong. See solid board privacy.

Replace With Privacy Fence

For old, rusty or low chain link, a new full-privacy vinyl fence often costs only a little more than premium slats. Cheaper routes are in inexpensive privacy ideas.

IF YOU REPLACE IT

Privacy Fences That Replace Chain Link

When slats and screen are not worth it on an old fence, these are the usual upgrades.

Most Popular

Full-Privacy Vinyl

6 ft and 8 ft

Interlocking vinyl with no gaps, no staining and reinforced rails. 100% privacy with almost no upkeep.

Privacy:

100%

Colors:

White, tan, woodgrain

Rails:

Aluminum reinforced

Best For:

Long-term privacy

Lifetime limited warranty

Wood

Board-on-Board Cedar

Shadowbox Privacy

Overlapping boards on both sides of the rail give full privacy and look good from both yards.

Privacy:

Near 100%

Wood:

Western Red Cedar

Finish:

Stain or natural

Best For:

Good-neighbor fence

Same look both sides

Keep Chain Link

Vinyl-Coated Chain Link

With Built-In Slats

New black vinyl-coated fabric on heavier posts, sized from the start to carry privacy slats in wind.

Coating:

Black PVC over zinc

Slats:

Factory-matched

Posts:

Upsized for wind

Best For:

Budget privacy

Built for the wind load

FREQUENTLY ASKED QUESTIONS

Chain Link Privacy Questions

Cost, wind and durability, answered.

What is the cheapest way to add privacy to a chain link fence?

Knitted fabric privacy screen, about $2 to $6 per foot in material, zip-tied to the mesh. It blocks 85 to 95% of the view and lasts roughly 5 to 10 years in sun.

Are privacy slats or privacy screen better?

Slats look more permanent, last longer and do not flap, but cost two to three times as much and take longer to install. Screen is faster and cheaper and is easier to remove later.

Will privacy slats damage my chain link fence?

Slats do not damage the mesh, but they increase wind load. On a fence with shallow or thin line posts, strong wind can bend posts or pull footings. Wind-slit screen or extra posts reduce the risk.

How much privacy do chain link slats give?

Standard tubular slats give about 75 to 85%. Winged and hedge-style slats reach 90 to 98%. No slat is fully opaque; for 100% you need a board overlay or a solid fence.

Can I put privacy slats in a 4-foot chain link fence?

Yes, but a 4-foot fence only blocks the view of someone sitting down. If you want standing privacy you need a 6-foot fence, and many cities limit fence height, so check before adding height.

Do I need a permit to add privacy slats to chain link?

Usually not, since the fence height does not change. Some HOAs and a few cities regulate slat colors or screened fences facing the street, so check if you are in an association or on a corner lot.

PRIVACY OPTIONS QUOTE

Price Privacy Slats or a New Privacy Fence

We check whether your chain link can take the wind load, then price slats, screen or replacement so you can compare.

PREFER TO CALL DIRECTLY?

Speak directly with our estimating desk for quick questions or emergency repairs.

Fence condition checked before you spend

Slats, screen and replacement quoted side by side

Leaning posts reset 42 inches deep

Get Your Free Estimate

Quick response guaranteed within 24 hours

Online Booking Open

🔒 Your contact info is strictly confidential. We never sell your data or spam you.