-->
Our Process Gallery Why Choose Us

●

Now Booking Michigan Fence Builds & Gate Installations • Free On-Site Estimates

Metro Detroit & Ann Arbor

COMMERCIAL GATE AUTOMATION

|

Built for Traffic

Commercial Automatic Gates in Metro Detroit

Motorized slide and swing gates for warehouses, contractor yards, apartment lots and fleet parking. We size the gate, the posts and the operator together, so the system keeps cycling through Michigan ice, salt and snowplow season.

Cantilever & Swing Gates

UL 325 Rated Operators

Keypad, Card & Remote Access

Free Site Survey

Get Your Free Estimate

Quick response guaranteed within 24 hours

Online Booking Open

🔒 Your contact info is strictly confidential. We never sell your data or spam you.

WHY AUTOMATE THE ENTRANCE

One Gate That Controls Every Vehicle In and Out

A manual gate gets propped open by noon. An automatic gate closes behind every truck, logs who came through, and stops being a job someone has to remember.

Access Without a Gate Attendant

Drivers enter with a keypad code, prox card, remote or phone app. Exits open automatically on a buried vehicle loop, so trucks never stop on the way out.

No staff tied to the gate

After-Hours Lockdown

Set the operator to stay closed outside business hours and open only for authorized credentials, which takes your yard off the easy-target list.

Timer and credential control

Sized for Real Equipment

We match opening width and operator duty cycle to what actually rolls through: box trucks, semis, skid steers or residents in sedans.

Openings from 12 to 40 feet

Safety Devices Included

Photo eyes, edge sensors and entrapment protection are specified to UL 325 and ASTM F2200, the standards inspectors and insurers look for.

Entrapment protection standard

GATE & FENCE SYSTEMS

The Gate Is Only as Good as the Fence and Posts Around It

An operator is the last piece. These are the systems we build it into. Open any one for specs on materials, heights and hardware.

Most Common

Commercial Cantilever Slide Gates

Track-Free Rolling Gates

The gate rides on enclosed rollers mounted to two posts and never touches the driveway, so snow, ice and plowed slush do not jam it.

Openings:

12ft to 40ft

Frame:

Galvanized steel or aluminum

Infill:

Chain link, picket, mesh

Best For:

Yards, loading lots

No ground track to clear

Foundation

Heavy-Duty Structural Gate Posts

Steel Posts Set Below Frost

Automated gates cycle hundreds of times a week. We set oversized steel posts in deep concrete footings below the 42″ frost line so the gate stays plumb.

Post Size:

4″ to 6-5/8″ OD

Footing:

Below 42″ frost line

Material:

Schedule 40 steel

Best For:

Operator-driven gates

Stops sag before it starts

Perimeter

Commercial Chain Link Perimeter Fencing

6ft to 10ft Security Lines

Heavy-gauge galvanized or black vinyl-coated chain link that ties into the automated gate and closes the rest of the perimeter.

Heights:

6ft, 8ft, 10ft

Fabric:

9 gauge galvanized or coated

Options:

Barbed wire, privacy slats

Best For:

Industrial, storage, fleet

Matched to the gate frame

Full Scope

Commercial Fence Installation

Enclosures, Cages, Perimeters

Dumpster enclosures, generator cages and storefront fencing from the same crew, so one contractor owns the whole site plan and permit.

Materials:

Steel, aluminum, vinyl, wood

Permits:

Site plan filed by us

Scheduling:

Phased around operations

Best For:

Property managers

One contractor for the site

SLIDE OR SWING

Choosing the Right Gate Type for Your Entrance

Most Metro Detroit commercial entrances get a cantilever slide gate. It needs a straight run of fence beside the opening about half the gate width again for the counterbalance tail, but it handles wind, slopes and snow far better than a swing gate and is the easiest type to automate. Read more on our cantilever gate opener guide.

Swing gates make sense when there is no room for a slide tail, or for a narrower decorative entrance on an apartment or office property. They need clear, level swing space and stout hinge posts, and plowed snow piles in the swing path are the most common reason they stop opening in January. For homes, see our automatic gates page.

COMMERCIAL GATE COMPARISON

Cantilever Slide

Swing Gate

Max Practical Opening

Single operator

Up to 40ft

About 20ft double

Snow & Ice

Michigan winters

Unaffected

Needs cleared arc

Wind Load

Solid or slatted infill

Handles well

Strains operator

Space Needed

Beside or in front

Side tail run

Swing clearance

Sloped Drive

Grade at the opening

Works on slopes

Limited

HOW A GATE PROJECT RUNS

From Site Survey to a Gate That Cycles on Day One

Commercial gate projects usually take four to eight weeks from approval, mostly waiting on fabrication and permits. The install itself is a few days.

01

Step 1

Site Survey & Spec

We measure the opening, check grade and traffic flow, ask what vehicles use the gate and how often, and locate power for the operator.

Opening and tail run measured

Duty cycle and access method set

Power source located

PAPERWORK MANAGED

02

Step 2

Permits, Utilities & Fabrication

We file the site plan and permit, call in the Miss Dig 811 ticket, and order the gate frame and operator sized to the opening.

City permit filed

Utilities marked before digging

Electrician coordinated for power

03

Step 3

Install, Program & Train

Posts go in below frost, the gate is hung and leveled, the operator and safety devices are tested, and your staff gets a walkthrough.

Photo eyes and edges tested

Codes and remotes programmed

Manual release shown to staff

Gate Broken and Stuck Open?

Call (734) 977-0554. We can secure the opening and quote a repair or replacement for the frame, posts or hardware.

ACCESS CONTROL OPTIONS

How People and Vehicles Get Through

Pick the entry method by who uses the gate. Most sites combine two or three.

Keypad on a Gooseneck

A post-mounted keypad at driver-window height. Cheap to run, codes change in minutes, and good for vendors and deliveries.

Prox Card or Fob Reader

Each tenant or employee gets a credential you can shut off individually, which matters when people leave.

Remote Transmitters

Visor remotes for a small fleet or a handful of managers. Simple, but a lost remote has to be deleted from the receiver.

Phone App or Cellular Entry

Open the gate from a phone, grant temporary access to a contractor and see a log of every cycle.

Free-Exit Vehicle Loop

A sensor loop cut into the pavement opens the gate for any vehicle leaving, so exits never back up.

Fire Department Access

Most municipalities require emergency access, usually a Knox key switch or siren sensor. We confirm the requirement with the fire marshal.

FREQUENTLY ASKED QUESTIONS

Commercial Automatic Gate Questions

What property managers and business owners ask before they sign off.

How much does a commercial automatic gate cost?

Most commercial slide gate projects with an operator, safety devices and keypad land between $12,000 and $35,000. Width, operator duty rating, infill, power run and access control drive the number. You get an itemized quote after the site survey.

Will an automatic gate work in a Michigan winter?

Yes, if it is a cantilever slide gate or a swing gate with a cleared arc. Cantilever gates have no ground track, so snow and ice do not stop them, and commercial operators are rated for cold-weather operation. We also set posts below the 42-inch frost line so heave does not knock the gate out of alignment.

What safety standards apply to automatic gates?

UL 325 covers the operator and its entrapment protection, and ASTM F2200 covers how the gate itself is built, including guarding rollers and limiting openings. We specify both, plus photo eyes and edge sensors where people or vehicles could be caught.

Do I need a permit for a commercial gate?

Almost always. The city typically reviews the fence and gate for location and height, and electrical work for the operator needs its own permit. We file the fence permit and coordinate the electrician.

Can you automate the gate we already have?

Sometimes. A well-built slide gate on solid posts can often take an operator. Sagging frames, undersized posts or a gate on a ground track usually cost more to fix than to replace, and we will tell you which after looking at it.

How long does installation take?

The on-site work is typically two to four days. Fabrication of the gate frame and permit review usually take three to six weeks before that.

FREE GATE SITE SURVEY

Request a Commercial Gate Quote

Tell us about the entrance and who uses it. We will measure the opening and give you an itemized written price for the gate, posts, operator and access control.

PREFER TO CALL DIRECTLY?

Speak directly with our estimating desk for quick questions or emergency repairs.

Gate, operator and safety devices specified together

Permits and Miss Dig handled by us

Workmanship warranty on every install

Get Your Free Estimate

Quick response guaranteed within 24 hours

Online Booking Open

🔒 Your contact info is strictly confidential. We never sell your data or spam you.