-->
Our Process Gallery Why Choose Us

●

Now Booking Michigan Fence Builds & Gate Installations • Free On-Site Estimates

Metro Detroit & Ann Arbor

FENCE COST ESTIMATOR

|

Do the Math

Fence Cost Estimator: Price Your Fence Project

You can get within about 15 percent of a real quote with one formula: linear feet times the installed price per foot for your material, plus gates, plus old fence removal, plus any slope or access adjustment. Below are the Metro Detroit per-foot ranges to plug in and three worked examples.

One Formula, Four Inputs

Per-Foot Prices by Material

Gate & Removal Add-Ons

Three Worked Examples

DIRECT DISPATCH PHONE

Get Your Free Estimate

Quick response guaranteed within 24 hours

Online Booking Open

🔒 Your contact info is strictly confidential. We never sell your data or spam you.

THE FORMULA

Estimated Cost = Footage x Rate + Gates + Removal + Adjustments

Work through these four inputs in order. Each one is a number you can measure or look up below.

1. Measure Linear Feet

Walk or tape each run along the planned line. Count gate openings as fence footage too; we subtract them later.

Round up to the next 10 ft

2. Pick a Per-Foot Rate

Multiply footage by the installed rate for your material and height from the table below. Use the low end for flat, open yards.

Installed price, not material

3. Add Gates

Add each walk gate and drive gate at its own price. Gates carry the most hardware and the heaviest posts.

Walk $350–$900 each

4. Add Removal & Site Factors

Add old fence tear-out and haul-away, then 5 to 15 percent for steep slopes, tight access or heavy roots.

Removal about $3–$7 per ft

PER-FOOT RATES TO PLUG IN

Installed Fence Prices per Linear Foot in Metro Detroit

These ranges are typical installed prices in Wayne, Oakland and Macomb counties, including posts set 42 inches deep in concrete, labor and standard hardware. The spread inside each range comes from height, style (flat top vs lattice, board-on-board vs solid), post spacing, color and how straightforward the site is. Our full fence cost guide breaks each material down further.

Drive gates and specialty items are priced separately: double drive gates typically $900 to $3,000 depending on width and material, and automatic openers more. Permit fees are set by each city and are usually modest. An estimator gets you a budget; only a site measure catches grade changes, buried concrete, property line questions and HOA style requirements that move the final number.

INSTALLED PRICE PER FOOT

Typical Height

Per Linear Foot

Galvanized Chain Link

Pets, security

4 ft

$18–$30

Vinyl-Coated Chain Link

Black or green

4–5 ft

$25–$40

Pressure-Treated Wood

Board privacy

6 ft

$30–$45

Cedar Wood

Board or shadowbox

6 ft

$38–$60

Vinyl Privacy

Virgin PVC

6 ft

$35–$55

Ornamental Aluminum

Picket or pool code

4–5 ft

$35–$60

FROM ESTIMATE TO QUOTE

How We Turn Your Estimate Into an Exact Price

Use the estimator to set a budget, then let us confirm it on site. Our written quote is itemized so you can see every line.

01

Step 1

Run Your Numbers

Use the formula and per-foot table to get a budget range, and note which material and height you want.

Footage times rate

Gates and removal added

Low and high totals noted

EXACT FOOTAGE

02

Step 2

Free On-Site Measure

We measure every run, mark gates and grade changes, and check your city setbacks and HOA style rules.

Laser-measured footage

Slope and access assessed

Local rules confirmed

03

Step 3

Itemized Written Quote

You get a line-by-line price covering fence, gates, removal, permit and any site work, with no add-ons later.

Every item priced separately

Permit and HOA filing included

Price held in writing

Comparing Several Quotes?

Check post depth, post spacing, material grade and whether permits and removal are included. Those four lines explain most price differences.

WORKED EXAMPLES

Three Fence Estimates, Calculated

Real-world project shapes using the formula and mid-market Metro Detroit rates.

Cedar Privacy, 150 ft

150 ft x $38–$60 = $5,700–$9,000. Add one walk gate ($400–$900) and removal of 150 ft old fence ($450–$1,050). Estimate: about $6,550–$10,950.

Black Chain Link, 200 ft

200 ft x $25–$40 = $5,000–$8,000. Add one walk gate ($300–$700). No removal. Estimate: about $5,300–$8,700 for a 4-ft dog fence.

Aluminum Pool Fence, 120 ft

120 ft x $40–$65 for 54-inch pool-code panels = $4,800–$7,800. Add two self-closing gates ($500–$1,000 each). Estimate: about $5,800–$9,800.

Vinyl Privacy, 180 ft

180 ft x $35–$55 = $6,300–$9,900. Add a double drive gate ($1,200–$2,500) and 10 percent for a sloped side. Estimate: about $8,250–$13,640.

FREQUENTLY ASKED QUESTIONS

Fence Cost Estimator Questions

How accurate an online estimate is and what it misses.

How accurate is a fence cost estimator?

With accurate footage and the right material rate, usually within about 10 to 20 percent. The gap comes from site conditions an estimator cannot see: slopes, roots, buried concrete, access and HOA style requirements.

How much does a 100-foot fence cost?

Roughly $1,800 to $3,000 for 4-foot galvanized chain link, $3,000 to $4,500 for pressure-treated wood privacy, and $3,500 to $5,500 for vinyl privacy, before gates and removal.

Does the estimate include the gate?

Not in the per-foot rate. Add each gate separately: walk gates typically $350 to $900 and double drive gates $900 to $3,000 depending on width and material.

Why are fence quotes priced per foot?

Most of the labor and material scales with length: posts every 6 to 8 feet, rails and panels between them. Gates, corners and removal are added as separate line items.

Is a permit included in fence pricing?

In our quotes, yes: we prepare the plot plan and file the permit. City permit fees vary and are listed on the quote.

What is the cheapest fence per foot?

Galvanized chain link is the lowest installed cost per foot, followed by pressure-treated wood. Split rail is also inexpensive where privacy is not needed.

FREE EXACT QUOTE

Turn Your Estimate Into a Written Price

Send us your rough footage and material. We will measure on site and hand you an itemized quote. Need help with quantities? Try our fence calculator.

PREFER TO CALL DIRECTLY?

Speak directly with our estimating desk for quick questions or emergency repairs.

Laser-measured footage on site

Every gate, corner and removal itemized

Permits and HOA filing included

Get Your Free Estimate

Quick response guaranteed within 24 hours

Online Booking Open

🔒 Your contact info is strictly confidential. We never sell your data or spam you.