-->
Our Process Gallery Why Choose Us

●

Now Booking Michigan Fence Builds & Gate Installations • Free On-Site Estimates

Metro Detroit & Ann Arbor

FENCE COST GUIDE

|

Acreage Pricing

Price of Fencing Per Acre

One square acre takes about 835 feet of fence to enclose, so the price per acre is really the price per foot times 835. That puts an acre anywhere from about $1,500 for wire to $50,000 or more for vinyl or aluminum. Here is the math and the real ranges.

835 Feet Per Square Acre

Costs by Fence Type

Worked Examples Included

Gates & Terrain Explained

DIRECT DISPATCH PHONE

Get Your Free Estimate

Quick response guaranteed within 24 hours

Online Booking Open

🔒 Your contact info is strictly confidential. We never sell your data or spam you.

KEY TAKEAWAYS

What Fencing an Acre Actually Costs

Per-acre quotes hide the one number that matters: linear feet. Start there and the rest falls into place.

Start With Perimeter

A square acre is about 208.7 feet per side, or 835 feet around. A long, narrow acre can need 1,000 feet or more.

Shape changes the total

Material Sets the Range

Wire runs a few dollars a foot installed. Wood, vinyl and aluminum residential fencing runs $30 to $65 a foot.

10x spread by material

Gates Add Fast

A walk gate adds a few hundred dollars; a 12 to 16-foot drive or equipment gate adds $800 to $3,500 depending on material.

Plan gate count early

Acres Get Cheaper Per Acre

Doubling the area does not double the fence. Four square acres enclose with about 1,670 feet, roughly 500 feet per acre.

Bigger parcels, lower unit cost

THE MATH

Price Per Acre by Fence Type

Multiply linear feet by the installed price per foot, then add gates, removal of any old fence and site work. For a square one-acre lot that is 835 feet. Agricultural wire is cheap per foot because posts can sit 12 to 16 feet apart and labor goes quickly. Residential fences such as split rail, chain link or vinyl use posts every 6 to 10 feet, each set in concrete.

In Metro Detroit that matters because frost reaches about 42 inches. Posts on acreage still need to go below it or the line heaves and gates bind by spring. Many owners of one to five-acre parcels in outer Oakland, Macomb and Washtenaw counties mix materials: a good-looking fence along the road and around the house, and a low-cost wire or split-rail line along the back. See our fence cost guide for per-foot detail.

ONE SQUARE ACRE, 835 FT

Installed / Ft

Per Acre

Barbed or High-Tensile

Farm perimeter, wide spacing

$1.50–$4

$1,300–$3,300

Woven Wire Field Fence

Livestock, wood posts

$3–$7

$2,500–$5,800

Split Rail

2 or 3-rail cedar

$15–$30

$12,500–$25,000

Chain Link 4–6 ft

Galvanized or coated

$18–$35

$15,000–$29,000

Wood or Vinyl Privacy

6 ft, full privacy

$30–$55

$25,000–$46,000

Ornamental Aluminum

4–5 ft, powder-coated

$35–$65

$29,000–$54,000

ESTIMATE YOUR OWN ACREAGE

Three Steps to a Realistic Budget

You can get within 15 percent of a real quote with a tape measure, a parcel map and the table above.

01

Step 1

Measure the Real Line

Pull the parcel map from your county GIS site and trace only the sides you actually need to fence. Many owners skip a side that already has a neighbor's fence.

Use the survey, not a guess

Subtract existing fence runs

Note slopes and wet areas

DO THE MATH

02

Step 2

Multiply by Material

Linear feet times the per-foot range gives a low and high number. Split the job if you want different materials front and back.

Feet x price per foot

Use the high end on rough ground

Price each section separately

03

Step 3

Add Gates & Extras

Add each gate, removal of old fence, brush clearing and any permit. These items often add 10 to 25 percent.

Walk and drive gates

Old fence tear-out and haul

Permit and survey if needed

Worked Example

A 2-acre lot, 295 by 295 feet, has 1,180 feet of perimeter. Chain link at $22/ft is about $26,000; add two gates and the total lands near $28,000.

WHAT MOVES THE PRICE

Six Factors That Change Your Per-Acre Cost

Two one-acre lots with the same fence can differ by thousands. These are the reasons.

Lot Shape

A 100 by 435-foot acre needs about 1,070 feet of fence, 28 percent more than a square acre of the same area.

Terrain & Soil

Slopes need stepped or racked panels, and clay or wet ground needs bigger footings. Both add labor.

Clearing the Line

Brush, saplings and old wire along a rear line can add $1 to $5 per foot before a single post goes in.

Height

Moving from 4 to 6 feet raises material cost roughly 20 to 40 percent and needs heavier posts.

Access

If an auger truck cannot reach the line, posts are dug by hand or with a smaller machine, which slows the job.

Permits & Setbacks

Many townships regulate fence height along roads. We confirm your rules and pull the permit before we quote the final layout.

Gate Count & Size

Every opening needs braced or concrete-set gate posts. A property with a drive gate, an equipment gate and two walk gates can add $3,000 to $6,000 before a foot of fence is counted.

Mixing Materials

Putting the expensive material only where it shows, such as aluminum or vinyl along the road and split rail or wire along the back, often cuts a one-acre budget by a third.

FREQUENTLY ASKED QUESTIONS

Fencing Per Acre Questions

Answers for owners of larger lots and small acreage.

How many feet of fence do I need for one acre?

About 835 linear feet for a perfectly square acre. Rectangular or irregular lots need more; a long narrow acre can take 1,000 to 1,100 feet.

What is the cheapest way to fence an acre?

High-tensile electric or barbed wire, at roughly $1,300 to $3,300 per acre installed. These are for livestock or boundary marking, not privacy or pet containment.

How much does it cost to fence one acre with chain link?

Most one-acre chain link projects land between about $15,000 and $29,000 including installation, depending on height, coating and gates.

How much does a privacy fence around an acre cost?

A 6-foot wood or vinyl privacy fence around a square acre typically runs $25,000 to $46,000. Many owners only put privacy on the sides that face neighbors or roads.

Does fencing more acres lower the cost per acre?

Yes. Perimeter grows slower than area, so a 10-acre square needs about 2,640 feet, roughly 264 feet per acre.

Do I need a survey to fence acreage?

If the corners are not clearly staked, yes. A boundary survey avoids building on a neighbor's land, and we install to surveyed pins.

FREE ACREAGE ESTIMATE

Get an Exact Price for Your Property

We walk the line, measure every run and price mixed materials so you put the money where it shows.

PREFER TO CALL DIRECTLY?

Speak directly with our estimating desk for quick questions or emergency repairs.

Measured footage, not a guess

Mixed-material options priced

Posts below the 42″ frost line

Get Your Free Estimate

Quick response guaranteed within 24 hours

Online Booking Open

🔒 Your contact info is strictly confidential. We never sell your data or spam you.