-->
Our Process Gallery Why Choose Us

●

Now Booking Michigan Fence Builds & Gate Installations • Free On-Site Estimates

Metro Detroit & Ann Arbor

FENCE MATERIAL CALCULATOR

|

Formulas Inside

Fence Calculator: How Much Material You Need

Every wood privacy fence comes down to four counts: posts, rails, pickets and concrete. Each has a simple formula based on your footage and post spacing. Here are the formulas, a fully worked 150-foot example, and the Michigan detail most online calculators miss: post holes 42 inches deep.

Posts: Footage / 8 + 1

Rails: 2–3 per Section

Pickets: Inches / Board Width

About 3 Bags Concrete per Post

Get Your Free Estimate

Quick response guaranteed within 24 hours

Online Booking Open

🔒 Your contact info is strictly confidential. We never sell your data or spam you.

THE FOUR FORMULAS

Fence Material Formulas at a Glance

Calculate each straight run separately, then add them together. Round every count up, never down.

Posts

Sections = run length / post spacing, rounded up. Posts = sections + 1 per run, plus one extra post for each gate opening.

8 ft spacing is standard for wood

Rails

Rails = sections x rails per section. Use 2 rails up to 4 ft tall and 3 rails for 5- to 6-ft privacy fences.

2x4 x 8 ft rails

Pickets

Pickets = (footage x 12) / (board width + gap). A 1x6 board is really 5.5 inches wide; add 10 percent for waste.

Shadowbox needs about 1.5x

Concrete

For a 4x4 in a 10-inch hole 42 inches deep, plan about three 80-lb bags per post. A 12-inch hole takes about four.

Gate posts get the larger hole

WORKED EXAMPLE

Calculating a 150-Foot, 6-Foot Wood Privacy Fence

Take a common backyard: a 60-foot back line and two 45-foot sides, connected as one continuous fence, with a 4-foot walk gate on one side. At 8-foot spacing that is 8 sections on the back and 6 on each side, 20 sections total. A continuous fence needs one more post than it has sections, so 21 posts, plus one more for the gate opening: 22 posts. Corner, end and gate posts should be heavier (we use 6x6 or steel-stiffened posts at gates).

Three rails per section times 20 sections is 60 rails. Pickets are 150 feet x 12 = 1,800 inches, divided by 5.5 inches per board = about 328 boards, plus 10 percent waste = 360. Concrete at three 80-lb bags per post is 66 bags. Do not forget post caps, about 2,200 exterior screws or ring-shank nails (two per board per rail), gate hardware, and a MISS DIG 811 ticket before you dig.

150-FT PRIVACY FENCE TAKEOFF

Formula

Quantity

Sections

8 ft post spacing

8 + 6 + 6

20

Posts

Sections + 1 + gate

20 + 1 + 1

22 posts

Rails

3 per section

20 x 3

60 rails

Pickets

1x6, no gap, +10%

1,800 in / 5.5

About 360

Concrete

80-lb bags, 42-in holes

22 x 3

66 bags

HOW TO MEASURE

Measure Your Fence Line in Three Steps

Accurate footage matters more than any formula. Small errors multiply across every post, rail and board.

01

Step 1

Confirm the Line

Find your property corners or survey stakes and decide how far inside the line the fence will sit. Check city setbacks and HOA rules first.

Locate survey pins

Stay a few inches inside

Check front-yard height limits

STRING IT

02

Step 2

Measure Each Run

Pull a string line between corner stakes and measure each straight run separately with a long tape or measuring wheel.

One number per straight run

Mark gate openings and widths

Note slopes and obstacles

03

Step 3

Run the Formulas

Calculate sections and posts per run, then rails, pickets and concrete, and round everything up.

Add a gate post per opening

Add 10% picket waste

Heavier posts at gates and ends

Not Sure Where the Line Is?

We measure every project on site for free and confirm setbacks and permit needs before anything is ordered.

ADJUST FOR YOUR FENCE

How the Counts Change by Fence Type

The formulas above are for a solid wood privacy fence. Adjust for other styles and materials.

Spaced Pickets

Add the gap to the board width. 3.5-inch pickets with 2.5-inch gaps: footage x 12 / 6. A 100-ft run needs 200 pickets.

Shadowbox

Boards alternate sides with overlap, so plan roughly 1.4 to 1.6 times the solid-fence picket count.

Vinyl Panels

Panels are usually 6 or 8 ft wide, so posts = panels + 1 per run. Post spacing is fixed by the panel; do not stretch it.

Aluminum

Most panels are about 6 ft on center. Count panels per run and add one post, plus a gate post on each side of every gate.

Chain Link

Line posts every 10 ft max, terminal posts at ends, corners and gates. Fabric, top rail and tension wire equal the footage.

Slopes

On a slope, measure horizontal distance for post count and add 5 to 10 percent extra material for stepped panels.

FREQUENTLY ASKED QUESTIONS

Fence Calculator Questions

Quick answers about quantities and spacing.

How many fence posts do I need for 100 feet?

At 8-foot spacing, 100 feet is 13 sections (12.5 rounded up), so 14 posts for one straight run, plus one more for each gate. At 6-foot spacing it is 17 sections and 18 posts.

How many bags of concrete per fence post?

For a 4x4 in a 10-inch hole 42 inches deep, about three 80-lb bags. A 6x6 or a 12-inch gate post hole needs about four to five. Shallower holes use less, but in Michigan they also heave.

How deep should fence posts be in Michigan?

Frost reaches about 42 inches in Metro Detroit, so we set posts 42 inches deep in concrete. Shallower posts tend to lift and lean after a few winters.

How many pickets are in an 8-foot section?

About 18 for solid 1x6 boards (96 / 5.5 = 17.5, rounded up). With a half-inch gap it is 16.

How much extra material should I order?

Add about 10 percent to pickets and boards for culls, cuts and mistakes, and buy a spare post or two for long runs. Rails and panels are counted exactly, but order one extra of each in case one arrives damaged or warped.

Should fence posts be 6 or 8 feet apart?

Eight feet is standard for wood privacy fences. Six feet makes a stiffer fence in windy, open areas and is common for vinyl and aluminum panels.

FREE MEASURE & QUOTE

Let Us Do the Takeoff for You

We measure, count and price every post, rail, panel and gate in a written quote. To turn quantities into dollars, see our fence cost estimator.

PREFER TO CALL DIRECTLY?

Speak directly with our estimating desk for quick questions or emergency repairs.

Laser-measured footage

Posts set 42 inches deep in concrete

Itemized materials and labor

Get Your Free Estimate

Quick response guaranteed within 24 hours

Online Booking Open

🔒 Your contact info is strictly confidential. We never sell your data or spam you.