-->
Our Process Gallery Why Choose Us

●

Now Booking Michigan Fence Builds & Gate Installations • Free On-Site Estimates

Metro Detroit & Ann Arbor

FENCE CARE GUIDE

|

Cleaner by Material

The Best Fence Wash for Every Fence Material

There is no single best fence wash. The right cleaner for cedar will dull aluminum, and the one that brightens vinyl can burn wood. Here is the cleaner type that works on each material, the mix, and what to never use.

Wood, Vinyl, Aluminum, Chain Link

Mix Ratios Included

Plant-Safe Methods

Prep for Stain Explained

DIRECT DISPATCH PHONE

Get Your Free Estimate

Quick response guaranteed within 24 hours

Online Booking Open

🔒 Your contact info is strictly confidential. We never sell your data or spam you.

THE SHORT ANSWER

Best Fence Wash by Material

Pick by what your fence is made of, then by what is on it: dirt, mildew, green algae or rust stains.

Cedar and Wood

An oxygen-bleach (sodium percarbonate) fence and deck wash. It kills mildew and lifts gray without the damage chlorine bleach does to wood fibers.

Oxygen bleach wins

Vinyl

A vinyl siding cleaner or mild detergent for dirt; a diluted bleach soft wash for green algae. Vinyl tolerates bleach that wood does not.

Soft wash for green

Aluminum

Car wash soap and water. Powder coat needs nothing stronger, and abrasives or solvents will dull the finish.

Car soap, soft cloth

Chain Link

A hose and a detergent scrub where needed. For rust spots on galvanized wire, a mild rust remover on a rag, then rinse.

Rinse is usually enough

CLEANER TYPES

How the Main Fence Wash Types Compare

Most fence washes on the shelf are one of five chemistries with different labels. Detergents (including dish soap; see our Dawn on untreated wood guide) lift dirt and grease but do not kill mildew. Oxygen bleach kills mildew and algae and is safe on wood and plants when rinsed. Chlorine bleach kills growth fast but whitens wood unevenly, breaks down its fibers and burns lawns. Oxalic acid is a brightener, used after cleaning to remove tannin and rust stains and restore wood color.

Sodium hydroxide strippers remove old stain and are only for refinishing jobs; they darken wood and must be followed by a brightener. On wood that will be stained, the best sequence is oxygen-bleach wash, rinse, oxalic brightener, 48 hours of drying, then stain. That is the sequence our staining and sealing crew uses, and it is covered step by step in how to stain a fence.

FENCE WASH TYPES

Best For

Avoid On

Detergent / Dish Soap

Dirt and grease

All materials

Mildew problems

Oxygen Bleach

Sodium percarbonate

Wood, vinyl

Nothing common

Chlorine Bleach Mix

Soft wash, diluted

Vinyl algae

Cedar, plants

Oxalic Acid

Brightener

Wood before stain

Aluminum

Stain Stripper

Sodium hydroxide

Removing old stain

Routine cleaning

HOW TO APPLY IT

Washing a Fence Without Hurting It or the Lawn

The method is the same for every cleaner. Only the mix and the pressure change.

01

Step 1

Protect and Pre-Wet

Soak plants and grass along the fence with plain water, then wet the fence. Cleaners work better on damp surfaces and wet plants absorb less runoff.

Plants soaked first

Fence pre-wet top to bottom

Cloudy day, not full sun

LET IT WORK

02

Step 2

Apply and Dwell

Apply bottom up with a pump sprayer. Oxygen bleach: about 1 cup per gallon of warm water, 10 to 15 minutes. Vinyl soft wash: about 1 part bleach to 4 parts water, 5 to 10 minutes.

Bottom up to avoid streaks

Never let it dry on

Scrub stubborn spots with nylon

03

Step 3

Rinse Thoroughly

Rinse top down with a hose or a pressure washer on a wide tip at low pressure. Rinse plants again when you finish.

Under 800 psi on cedar

Under 1,500 psi on vinyl

Plants rinsed afterward

Never Mix Cleaners

Do not combine chlorine bleach with ammonia or acids like oxalic or vinegar. Rinse fully between products.

PROBLEM BY PROBLEM

Which Wash for Which Stain

Match the cleaner to the problem you are actually looking at.

Green Algae on Vinyl

Diluted bleach soft wash or a vinyl cleaner. It comes back fastest on shaded north sides; a yearly spring wash keeps it off.

Black Mildew on Wood

Oxygen bleach wash, then rinse. If spots remain, a second application usually clears them without chlorine.

Gray, Weathered Cedar

Oxygen bleach to clean, oxalic acid to brighten. A light sanding brings back the deepest grays. Seal after; see fence sealant.

Rust Streaks

From nails and hinges. Oxalic acid removes them on wood; on vinyl use a rust stain remover made for siding. Replace the rusting fastener.

Sprinkler Hard Water Spots

White mineral spots on vinyl and dark spots on wood. A mild acid cleaner like diluted vinegar on vinyl; oxalic acid on wood. Re-aim the heads.

Scuffs on Vinyl

A melamine sponge removes mower and ball marks. Do not use abrasive powders, which dull the surface.

FENCE CARE SERVICES

Fence Care We Handle

If cleaning turns up rot, leaning or sagging, these are the next steps.

Wood

Staining & Sealing

Wash, Brighten, Stain

The full sequence: oxygen-bleach wash, brightener, dry time, and a penetrating stain that soaks in.

Wash:

Oxygen bleach

Brighten:

Oxalic acid

Stain:

Penetrating

Best For:

Cedar and PT

Wash included

Repair

Storm & Tree Damage

Sections and Posts

Broken boards, cracked vinyl and bent aluminum replaced to match, with damaged posts reset below frost.

Wood:

Boards and rails

Vinyl:

Panels and posts

Metal:

Sections and posts

Best For:

After a storm

Matched to your fence

Upgrade

Vinyl Fencing

Low Maintenance

If you are tired of staining, a vinyl fence needs only a rinse twice a year.

Upkeep:

Rinse twice a year

Styles:

Privacy, picket

Colors:

White, tan, woodgrain

Best For:

No more staining

Lifetime limited warranty

FREQUENTLY ASKED QUESTIONS

Fence Wash Questions

Cleaners, pressure and timing.

What is the best cleaner for a wood fence?

An oxygen-bleach fence and deck wash, based on sodium percarbonate. It kills mildew and lifts gray without the whitening and fiber damage chlorine bleach causes, and it is far safer for plants.

What is the best way to clean a vinyl fence?

A mild detergent or vinyl siding cleaner with a soft brush for dirt, and a diluted bleach soft wash, about 1 part bleach to 4 parts water, for green algae. Rinse thoroughly and keep pressure under about 1,500 psi.

Is bleach bad for a wood fence?

Chlorine bleach is hard on wood. It whitens unevenly, breaks down lignin so the surface fuzzes, and kills grass and shrubs along the fence. Oxygen bleach does the same job without those problems.

Can I use vinegar to clean my fence?

Diluted white vinegar works for light mildew and hard water spots on vinyl. On wood it is weaker than oxygen bleach and does little for deep mildew.

How often should I wash my fence?

Once a year in spring for vinyl and wood, and before every restain on wood. Shaded, damp sides in Michigan may need a mid-summer touch-up.

Do I need a pressure washer?

No. A pump sprayer, a soft brush and a garden hose handle most fences. If you use a pressure washer, use a wide tip and low pressure, especially on cedar.

WASH, SEAL & REPAIR

Let Us Clean, Seal or Fix Your Fence

We wash wood fences as prep for staining and sealing, and replace boards, posts and hardware that cleaning cannot fix.

PREFER TO CALL DIRECTLY?

Speak directly with our estimating desk for quick questions or emergency repairs.

Material-safe cleaning and brightening

Penetrating stain applied once dry

Repairs quoted before work begins

Get Your Free Estimate

Quick response guaranteed within 24 hours

Online Booking Open

🔒 Your contact info is strictly confidential. We never sell your data or spam you.